Here are the instructions to connect your professional Wifi transmitter to Wallee-R. This page addresses only a few examples, for more information, refer to the Wallee-R user manual and your wireless transmitter.
General settings
The Wallee-R module has an FTP server accessible with the following parameters:
- SSID: ‘ Wallee ‘, Wifi open without password
- Integrated DNS and DHCP server (automatic allocation of IP address for clients)
- IP address of the module: 192.168.33.1
- Module FTP Port: 21
- Username: Wallee
- FTP Password: Wallee administration password (default ‘ Wallee ‘)
Camranger configuration
- Connect the CamRanger module (Firmware > = 10) to your computer via an Ethernet cable,
- Launch the CamRanger settings software,
- In the section ‘ WiFi Networks ‘, add the WiFi network ‘ Wallee ‘ without password (open network),
- In the ‘ Share Settings ‘ section, enter the following settings:
- Share: FTP
- Hostname: ftp://192.168.33.1
- Username: Wallee
- PW: The Wallee administration password (‘ Wallee ‘ by default)
Nikon WT-4 configuration
- Connect your USB camera to your computer (the camera must be in USB MTP/PTP mode),
- Launch the Wireless Transmitter utility (Nikon) (Important note: The settings can also be made directly from your device in the ‘ Comm System ‘ menu. Wireless ‘),
- Follow the following choices:
- Choice of WT-4 equipment,
- Add/Edit Profiles,
- Add a profile (type of wireless interface and Ethernet):
- Wireless settings:
- SSID: Wallee
- Architecture: Infrastructure
- Authentication: Open
- Encryption: No encryption
- TCP/IP Settings
- Automatic detection
- FTP settings
- Address: 192.168.33.1
- Port: 21
- File:/
- Username: Wallee
- Password: Wallee administration password (default is ‘ Wallee ‘)
- Wireless settings:
- Close wizard
- Connect your camera to the WT-4 module,
- In the ‘ Comm System ‘ menu. Wireless ‘, ‘ transfer setting ‘, set the ‘ auto send ‘ parameter to ‘ on ‘.